Storage and Coiling Bracket for Fiber Optic Cables

The optical cable remaining rack is used to place the surplus optical cable when the optical cable is connected. Its main technical parameter is the diameter of the remaining cable rack (mm). Generally, each connector box is equipped with a remaining cable rack. 

Reference data: 

Cable storage diameter (mm): 600mm 

Weight (kg): 3.8 

Material: galvanized steel

Purpose: It is used to place the surplus optical cable when the optical cable is connected. Generally, a splice box is provided with a surplus cable rack. 

The surplus cable rack is used to store the surplus optical cable on the tower. Its main technical parameter is the diameter of the surplus cable rack (mm). It is usually used in conjunction with the optical cable splice box. Each splice box is equipped with one surplus cable rack. 

A series of rod fastening clamps designed according to the rod type at the hanging point of the optical cable can realize the connection and installation of the tension clamp and the suspension clamp with the pole tower. 

The fastening clamp is used to connect the tension clamp, the suspension clamp, the remaining cable rack and the optical cable connection box to the iron tower. Its main technical parameters are the destruction load (kN) and the size of the main material of the power tower at the position of the optical cable hanging point, and its configuration The method is one-to-one correspondence with strain clamps, suspension clamps, remaining cable racks and optical cable splicing boxes.

Ordering instructions: 

There are two types for pole use and tower use. For pole use, the pole diameter must be provided. 

Tower use: one surplus cable rack, 2 sets of small splints; 

Pole use: one remaining cable rack, two sets of stainless steel belt fastening clamps