Intermediate LD 178-203mm Pole Clamp

The cable hoop is a cable in the line to fix the pole. There are flat hoop, reinforced flat hoop, double hoop hoop and four hoop hoop. Generally, the specifications of flat steel and the diameter of the rods to be held are used to express its specifications, such as 60×6×150. 

Features: 

1. Product manufacturing is strictly controlled and meets production standards. 

2.The surface of the product has no burrs and is relatively smooth. 

3.Support customization of a variety of special-shaped products

In order to adapt to various out-of-round piers, the hoop body of the hoop should be a flexible hoop body without hoop stiffening, that is, a steel plate without a stiffening plate is used as the hoop body. In this way, when the pretension is applied, since the hoop body is flexible, it is easy to closely adhere to the pier. 

The hoop device is composed of a hoop plate, a wing plate, a tie rib plate, a bolt and an inner liner. 

 An embedded hoop, which is formed by joining the left and right halves of the hoop. The left and right halves of the hoop are both in a semicircular ring shape, and both ends of the semicircular ring are bent outward to form one The mounting ear is characterized in that: the mounting ear at one end of the left half piece of the hoop is provided with an embedding groove, and correspondingly, a pin is provided on the mounting ear at the corresponding end of the right half piece of hoop, and one end of the right half piece of hoop The pin on the mounting ear is inserted into the groove on the mounting ear at one end of the left half of the hoop.

Technical specification table: