Stainless Steel Strapping Clip Light Duty

1.Product name: tooth-shaped stainless steel cable tie buckle 

2.Material: 316/304 stainless steel, with good and corrosion resistance. It can resist high temperature and low cold. 

3.Application: Suitable for stainless steel tape with a width of 6-20MM, such as 6.4 9.5, 12.7, 15.9, 19.0mm.

4.Use with stainless steel cable ties; 

5.Used to bundle signs, cables, pipelines, etc., shipbuilding, mining, petroleum, electric power, submarine cables, etc. 

6.Various sizes and material types are available.

Packaging:

The buckles packaging in plastic bags of 100 units and these in turn in cardboard boxes adequately protected against damage or humidity, with the requested customer information.

Installation steps: 

1.According to the actual use, cut a certain length of stainless steel cable tie, thread the buckle to one end of the tape, and reserve a length of about 5cm(Cutting length = the required length of the bundle+5cm+10cm).

2.Bend the reserved tape to preliminarily fix the stainless steel buckle. 

3.When strapping, wear the other end of the stainless steel tape, and reserve a length of at least about 10cm for the strap tightening machine to pull into the tape.

4.Clamping the tape with a tightening machine, and start to shake the rocker arm to slowly pull in the tape. Make sure that the tape is just tightened. Do not tighten the tape too much to avoid damage the tool.

5.When the tape is tightened, fold back the entire strap tightening machine and cut the tape by turning the blade handle. 

6.Knock the two corners of the buckle flat with a hammer to block the final tape head to complete the binding process.