< >

Preformed & Helical Guy Grip For Conductor

The ACSR preformed strain clamp is matched with the heart-shaped ring to connect the conductor to the strain pole tower, which can replace the conventional bolt-type strain clamp, compression-type strain clamp and wedge-type strain clamp.

Purpose: withstand full tension

Contact Now

Product Details

Features

1. There is a large contact area between the clamp and the wire, the stress distribution is even, there is no stress concentration point, and the achievable grip strength is not less than 95% of the stranded wire to calculate the breaking force.

2. The wire clamp is made of the same material as the wire.

3. The wire clamp is simple to install, does not require any complicated tools, and can be completed by one person. The installation quality is consistent, and it is also convenient for inspection.

4. The pre-twisted tension clamp has better vibration resistance, which can better protect the wires and prolong the life of the system.

5. It can be applied to wires of various cross-section sizes.

6. The direction of rotation of the clamp and the outer layer of the wire is the same. The standard is right-handed. If left-handed is required, it should be indicated in the order contract.

Product technical specification sheet:

Sn	Model No.	Suitable for conductor range(mm)		Conductor type
Sn	Model No.	Min	Max	Conductor type
1	NL-35/6	7.35	8.26	35/6
2	NL-50/8	9.26	10.39	50/8
3	NL-70/10	10.4	11.68	70/10
3	NL-50/30	10.4	11.68	50/30
4	NL-70/40	13.12	14.66	70/40
	NL-95/15			95/15
	NL-95/20			95/20
	NL-120/7			120/7
5	NL-120/20	14.67	16.59	120/20
	NL-95/55			95/55
	NL-120/25			120/25
	NL-185/8			185/8
6	NL-150/20	16.6	18.77	150/20
	NL-120/70			120/7
	NL-150/25			150/25
	NL-150/35			150/35
	NL-185/10			185/10
7	NL-185/25	18.78	21.26	185/25
	NL-185/30			185/30
	NL-210/10			210/10
	NL-185/45			185/45
	NL-210/25			210/25
	NL-210/35			210/35
	NL-210/50			210/50
8	NL-240/30	21.27	24.05	240/30
	NL-240/40			240/40
	NL-240/55			240/55
	NL-300/15			300/15
	NL-300/20			300/20
	NL-300/25			300/25
	NL-300/40			300/40
9	NL-300/50	24.06	27.2	300/50
	NL-300/70			300/70
	NL-400/20			400/20
	NL-400/25			400/25
	NL-400/35			400/35
10	NL-400/50	27.21	30.78	400/50
	NL-400/65			400/65
	NL-400/95			400/95
	NL-500/35			500/35
	NL-500/45			500/45
	NL-500/65			500/65

Using tips

1. Due to the special structure of the guy grip, only be used once after being stressed, and cannot be reused.

2. The specification and model of the guy grip must be provided when an inquiry.

3. It is not allowed to overlap on the guy grip, but it is allowed to overlap the conductors& cables.

4. The lay direction between the guy grip and the conductor & cables should be consistent. In general, we do right-hand direction mostly, if you need left-handed guy grip, please be kindly inform in advance and we customize.