Tension Set for ADSS 14.2-15.6mm ANZ020

Medium and large tension set are composed of a double-layer twisted wire structure. 

The tension inner rods is made of galvanized steel wire or aluminum-clad steel wire, and the inner wall of the pre-stranded wire is stuck with a layer of fine emery to increase friction. The inner rods includes 4 groups, during processing in the factory to avoid installation errors and facilitate quick installation. 

The ends of the pre-twisted wires are bent radially outward to avoid squeezing and damaging the optical cable. The tension outer rods is made of galvanized steel wire or aluminum-clad steel wire. The pre-twisted wire is pre-formed into a bundle during processing in the factory, and a firm layer of emery is adhered to the inner wall to reduce the lateral pressure on the optical cable. The grip strength of the strain clamp.

Preformed helical guy grip clamp with long span helical dead end, thimble clevis, U shackle, link fitting and pole attachment with related accessories. The spiral rods has sandy cover, excellent tensile properties, good resistance to oxidation and corrosive agents.

Installation steps: 

1.Align the installation mark of the outer wire with the optical cable and mark the installation. 

2.Align the first set of inner wire marks with the optical cable marks. 

3.The third group does the same as the second group. 

4.All the inner wires are installed. 

5.Align the outer wire installation mark with the inner wire installation mark.

6.Wrap one leg first. 

7.Wind the other leg again.

8. Wrap the end of the outer wire well.